High Voltage detector fameca tag 200 CEI 5-36KV CDT210R 0193 portatil

Description

hello appreciated buyer I am pleased to notify you that I work with feedbacks and you have 2 months to leave your feedback if you forget to leave your feedback you will be rated NEGATIVE ..please be careful with this WARNING
SPECIFICATIONS IN ACCORDANCE WITH (CEI IEC 61243-1) Type direct contact capacitive AC voltage detector 3 phase system voltage range limits 3kV to 90 kV (refer to the label indication) AC system frequency: 16 2/3, 50 indication) Group III (indication of voltage presence and permanent stand-by) Climatic category N (-25°C to +55"C submitted to battery type) Category: L without probe extension Field of outdoor all weather use. (And indoor) Permanent stand-by mode Built in "All check" test feature provides checking of all function and battery level. Green light indicates that the unit is ready. Light indication by 3 red lights. Sound indication by beeper. Probe fitting by M8 thread Insulating stick connection: Universal (sunrise) fitting Blue polycarbonate shell Supply: one 9 volt alkaline battery IEC 6LR61 Dimensions: 249 mm, 195 mm Weight: 0.270 kg 2.
Description
Contact Electrodes (probes) Various contact probe (straight probe, "Y or hook shape probe and indoor switchgear probes) available Warning: Some electrodes (especially extensions) involve special laboratory setting by the manufacturer 3. ALL CHECK FUNCTION This checking has to be done before and after any detection operation Checking before detection: Press shortly the test button with finger (do not use tool) During this test all the led's red and green have to lights. At the end the buzzer will beep. The green led will indicating the positive test and lights for approximately test is not positive (no green signal or failure in the test sequence) validity) Replace the battery (see (check the validity date: it is better to have two year after sale If the replacement of the battery has no effect the detector must be repair by approved service