Belt Grinder wheel set knife grinder 5" Drive-7/8" shaft, 4" tracking, 2" Idler

Description

Belt Grinder Wheel Set
CNC machined from Aluminium 6061
This is as good as it can get
Wheel Set Description
We are proud to introduce our Newest Belt Grinder wheel set.
Set Includes:
One
130 mm diameter Drive Wheel:
D
rive wheel is CNC machined with 7/8" mm bore (H7 tolerace).  Bore is equipped with a 3/16" key way and a set screw. Wheel is 55 mm wide (2.2"). Bore is 35 mm long (1.4"). Surface of wheel is truly crowned to insure belt won't jump off wheel . Please refer to the wheel's sketch for the exact wheel dimensions
Two
x 50 mm diameter Idler Wheels:
E
ach wheel is CNC machined and fitted with
three
1/2" bearings. (Heavy duty 6201-1/2 RS bearings)  Bearings are rubber sealed to protect from dust. Bearings are placed back to back (best combination). A 10 mm wide standoff (sleeve) will raise the wheel of the mounting plate. This bearing combination is the best tested solution against bearing failure as it allow for tightening the mounting bolts without causing any axial force on the bearings
(ball bearings should not bear lateral load)
One
100 mm diameter Track Wheel:
Large Tracking wheels adds considerable control and stability of the sanding belt (from experience)
E
ach wheel is
CNC machined and
fitted with
three
1/2" bearings. (Heavy duty 6201-1/2 RS bearings)  Bearings are rubber sealed to protect from dust. Bearings are placed back to back (best combination). A 10 mm wide standoff (sleeve) will raise the wheel of the mounting plate. This bearing combination is the best tested solution against bearing failure as it allow for tightening the mounting bolts without causing any axial force on the bearings
(ball bearings should not bear lateral load)
YES
we make Custom Orders
If you cannot find the wheel's shape/design or the dimensions that you are looking for, please contact us via eBay messaging system. Describe clearly your requirement and we shall reply promptly with a quote. We shall create an ebay listing to enable you purchase that item
Please Note:
Due to machine setup time we have to place a
minimum order quantity
of 16 items of any type
Shipping
We understand that customers would like to receive their purchase as soon as possible. Therefore I provide postage service that is comparable -in speed- to local postal service. And to achieve that:
All orders are shipped using Priority
Mail
All order are shipped the same working day if paid by 3 PM central European time
From experience, in most cases; Items arrive in 3-6 work days to all EU countries
From experience, in most cases; Items arrive in 7-20 work days to North America and Australia
Limitation of Liability
In no event shall pulley-wheel be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of its products.