Beer Keg Coupler Sankey D (Taprite) Chrome Brass with PRV  for Domestic Beer

Description

Beer Keg Coupler Taprite. Sankey D Chrome Brass with PRV Sanke Domestic Tap.
Ever wish you had an extra keg coupler?
Used Sanke type D coupler has some wear and tear, but should be fully functional. This used keg coupler was included with purchase Edgestar Kegerator about 10 years ago (estimate), I use Cornelius kegs and no longer use Sanke type couplers. The exterior of the coupler is still mostly very shinny, however coupler has some minor scratches around the PRV and the gas inlet exposing the brass under the chrome finish.
Probe Seal, Bottom Seal, gas check valve, and O-rings (3) are flexible and in good condition.
Check Ball Retainer has yellowed due to use and age.
Gas side hex nut has some minor pliers damage.
Probe (see Photo 5) has blemishes on the chrome finish
Bottom surface (see Photo 4) has wear on the chrome finish
Gas hose nipple is for 5/16 ID tubing.
Beer side tailpiece is
NOT included
. You must have a tailpiece that fits your dispensing system to use this coupler.
No tubing is included in this listing
Coupler was thoroughly cleaned and comes fully assembled. The O-rings will have a very small amount of  Brewer's Edge Keg Lube on them to facilitate assembly.
Coupler is intended for use with typical American domestic beers.